routing dinamic 'ospf' router 1

Router>

Router>en

Router#conof t

^

% Invalid input detected at '^' marker.

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int ra fa0/0 - fa0/1

Router(config-if-range)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface

FastEthernet0/0, changed state to up

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface

FastEthernet0/1, changed state to up

Router(config-if-range)#exit

Router(config)#int fa0/1

Router(config-if)#ip

Router(config-if)#ip

Router(config-if)#ip ad

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#exit

Router(config)#int fa0/2

%Invalid interface type and number

Router(config)#int fa0/0

Router(config-if)#ip ad

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#exit

Router(config)#

%SYS-5-CONFIG_I: Configured from console by console

Router#

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#route ?

eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)

ospf Open Shortest Path First (OSPF)

rip Routing Information Protocol (RIP)

Router(config)#route osp

Router(config)#route ospf ?

<1-65535> Process ID

Router(config)#route ospf 10 ?

Router(config)#route ospf 10

Router(config-router)#net ?

A.B.C.D Network number

Router(config-router)#net 192.168.1.1 0.0.0.255 ?

area Set the OSPF area ID

Router(config-router)#net 192.168.1.1 0.0.0.255 area ?

<0-4294967295> OSPF area ID as a decimal value

A.B.C.D OSPF area ID in IP address format

Router(config-router)#net 192.168.1.1 0.0.0.255 area 10

Router(config-router)#net 192.168.2.1 0.0.0.255 area 10

Router(config-router)#exit

Router(config)#exit

%SYS-5-CONFIG_I: Configured from console by console

Router#wr

Building configuration...

[OK]

Router#